HP Deskjet 6840 Driver for Mac: A Step-by-Step Guide to Setup and Configuration

The HP Deskjet 6840 is a reliable printer that offers high-quality printing, scanning, and copying features. However, setting up and configuring it can be a bit challenging, especially if you're new to network printing. In this article, we'll guide you through the process of installing the HP Deskjet 6840 driver for Mac and configuring your printer for wireless connectivity.

Step 1: Install the Printer Driver

To start, make sure your computer is connected to the same network as your printer. Then, follow these steps:

* Highlight the port for your printer and check Enable Bidirectional Support.

* Set the data type to RAW, and hit OK.

* After setting the print processor, click the Ports tab and select the print processor from your printer manufacturer.

Note that this process may not work via wireless with certain printers, including the Lexmark 4800 Series. However, you can try using the proprietary print processor provided by your printer's manufacturer.

Step 2: Configure the Printer for Wireless Connectivity

To configure your printer for wireless connectivity, follow these steps:

* Open Devices and Printers and right-click the icon for your printer.

* Click Printer Properties > Advanced tab > Print Processor button.

* You can check by printing the network configuration page and verifying that it has a good IP address.

* Now unplug the Ethernet cable from the printer and you should be on the network.

At this point, you have two choices: use the Wireless Setup Wizard or go to the Advanced page and enter the SSID and WPA-PSK encryption key manually. Make sure to enable the radio and set the mode to Infrastructure.

Step 3: Configure the Printer's Network Configuration

To configure the printer's network configuration via its internal web page, follow these steps:

* Connect the Deskjet to the router via an Ethernet cable.

* Get the IP address from the router or by printing the Deskjet's network configuration page (press the button with the check mark).

* Browse the printer's web page at that IP address.

The HP Deskjet 6840 does not support WPA2, so please verify that your router is not set for WPA2 Personal (aka WPA2-PSK).

In conclusion, setting up and configuring the HP Deskjet 6840 driver for Mac can be a bit challenging, but by following these steps, you should be able to successfully install and configure your printer for wireless connectivity. Remember to check the compatibility of your router with the printer's network configuration settings.

Hp deskjet 6840 driver for mac